To all of our men and women serving our country, past and present -

Happy Memorial Day

I hope everyone has a safe and wonderful Memorial Day.

While no magic spell will transform a trashcan into anything other than a receptacle for holding whatever, we can pull out our magic craft sticks and transform it into something pretty.

So here is our first volunteer!  She isn't much to look at, but she's got potential!


Here's the first part of the transformation....she's been in the sun a bit.

So after the final wave of our craft wand, here she is! Some jute and paint will make everything better!





I hope you enjoyed today's short little bit, and are having a wonderful holiday weekend.

Linking up to:

So its not like I'm drawing a blank on pillow ideas....I have lots of those, but I'm feeling in a funk about what to do with some of the other spaces in the house, so its time that I found some inspiration for them.

Harrison is ready to go!

One of my favorite things to do is tour all of the model homes in the area. In Northern Va there are a {ton} of new home communities and most of them have model homes. So Mom, Steve, Harrison and I all piled into the car and took a tour of some  homes. Our plan was to hit 5 homes, but that didn't happen. We visited two and got some good ideas. The third we drove by because Harrison was eating, don't worry Steve was feeding him some fruit medley while I was driving down the gravel road. The 4th we never found. Then we decided to drive around Bull Run Mountain, and looked at all the pretty landscaping. The 5th house we stopped by but we didn't stay at long, because while it was open it should not have been. It was not anywhere near ready to be open to the public. We'll go back and visit that house in about a month.


So here are some of the photos we snapped today. I have to thank Steve for snapping these, because I was either talking to the salespeople or carrying H. Thanks sweetie!

Well Steve and I are back to the grind. We need to do a couple of days of double (sculpt and cardio) to get back on track as we should be just about to finish week 2, but instead we just finished week 1, and I have to say it's taking a lot less time to recover after the workouts. The long break did not help as we were both struggling with some  of the cardio last night, but we managed to do more of the power yoga, but I still can't go from downward dog to runner's lunge. I think the  biggest problem I have is that my knee to floor length is about 4" longer than my arms. I did get some of the way tho....you know until I couldn't reach the floor anymore and almost fell over.

I am feeling really good and the quality of sleep as increased ten-fold. I just wish I could sleep as long as I want, but I have 2 small problems with that. :) Steve has been great tho in letting me sleep in. We've been taking turns as to who sleeps in.

I have noticed that my legs are getting more toned and that some of my 'tight' jeans....really aren't that tight any more. I didn't even have to suck it in the other day to button straight-out-of-dryer jeans. Yay!

I'm sure all of us have seen something in a store and said, "I can make that, and for a lot cheaper than that." I had that moment in Target about a week ago, and I said then I was going to make that pillow. Well, I didn't forget about that pillow, but I did forget how it was sewn together. So back to Target we go.

How do you deduce how a pillow has been sewn together at a store with no intention of buying it? You unzip it, remove the innards, turn it inside-out and hold it up to the light while your mother takes pictures {because you let your phone completely die}.


Then have your Mom text you those pictures, then ask your mom to text you the right pictures {the pavilion pictures were lovely though, Ma} and then refer to those pictures while building your pillow. Simple. *laughs*   Oh and we did put the pillow back to rights and back where she belonged...right above the $32.99 price tag.

So here's your newest pillow and the show!

Stuff you'll use

Fabric - 1 Yard
12" x 16" pillow form (wish I had this!)
Rotary Cutter
Cutting Mat
Ruler
Thread
Needle
Scissors
Disappearing Fabric Marker or Chalk

What you'll do

Cut fabric into two 12" x 16" panels and twenty 3-1/2" x 11" strips. If the fabric is wrinkled then iron out the wrinkles. Fold one long edge on a strip over 1" matching wrong sides (right sides out), press. Repeat for the remaining strips. The refer to the below picture for a visual of what we're building.


One on of your panels, right side up, make three marks on the 12" side from either corner every 1-1/4" inches. From those marks draw a line on the bias (45 degree angle) inwards towards the center of the panel.

Lay one of your strips down so that the folded edge is against the innermost line. Make sure to leave enough overlap on your strip so that you can trim it evenly with the edge of the panel.

Stitch down the strip, 3/4" from the folded edge. Be sure to sew in a straight line as the stitching will be visible. Remember when picking your thread color, a good contrast is better than a bad match, as I've exampled here. With all the choices I have for thread colors, I did not have a green that matched this fabric.

All this thread and a not a matching green....sigh

Lay the next strip on the panel, going the opposite direction of the first, but making sure to line up the folded edge of the strip with the line you made previously. Stitch this strip 3/4" from the folded edge, making sure to overlap this stitching over the previous stitching.

Trim the first strip's overlap (what is underneath the second strip) about a 1/4" from the seam.

With your ruler, measure 1-1/4" from the fold of the first strip and lay your next strip down. Stitch 3/4" away from the fold of this strip. If you need to, you can always mark a line 3/4" away from the folded edge and then stitch that line. Be sure to use a disappearing ink marker or chalk. Trim the underside of the 2nd strip even with this one's stitching. You want to remove the bulk of the strips in the center of the pillow.


You will continue to lay alternating strips 1-1/4" from the previous folded edge, stitching 3/4" away from each folded edge and then trimming the previous fabric 1/4" from the seam until the pillow has been covered in strips.

Turn your panel over and trim the strips even with the edge of your panel. With right sides together, stitch the panels together in a 1/2" seam, making sure to leave an opening for turning. Trim your corners and turn the pillow right-side out.


Stuff your pillow with the form (or if you're me then with fiber-fil) and then stitch the opening closed.










Some notes - I used a faux silk that color shifts, and the effect is wonderful. Target's pillow was silver satin. A cotton chintz, silk, satin, even shirting material would do wonderfully for this pillow. The only requirement I can think of is that the fabric be able to crease because you want those pleats crisp. If you're having trouble getting your pleats to stay, then you can use a press cloth dipped in a 2:1 ratio of water to white vinegar. The vinegar solution will make the pleats permanent, even through washing.

I hope you all enjoyed today's pillow and have a wonderful day!


Linking up to: